I am looking at buying a factory cruise control from a 2004 GU 4.2TD patrol to fit to my 2002 ST.
Are all the looms in place in the 2002 ST wagon ready to just plug in a factory Cruise control?
What components do I need to make sure that wreakers remove for me to make sure I get it all.
1, Unit in the drivers kick pannel and relay.
2, Switches from steeting wheel.
3, Actuator from under the bonnet.
Is there anything else like lamps from the instrament cluster or the like that I will need to fit to my car?
Thanks, David
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Removing factory Cruise control from 4.2 Gu.
Removing factory Cruise control from 4.2 Gu.
2002 GU TD42T ST wagon. TMIC & 2012 Hilux scoop
4" Lift, 90 series koni's, King springs, 4H Drop boxes, seperior super flex arm, MM hydraulic winch,
315/75/16 Goodyear Kevlar MTR's.
4" Lift, 90 series koni's, King springs, 4H Drop boxes, seperior super flex arm, MM hydraulic winch,
315/75/16 Goodyear Kevlar MTR's.
Who is online
Users browsing this forum: No registered users and 47 guests