Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Sierra Engine mounts

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 132
Joined: Tue Oct 11, 2005 9:13 pm
Location: Springfield

Sierra Engine mounts

Post by big wheel sigma »

Can enyone tell me if the engine mounts (the ones that bolt to the engine block) are interchangable between the 1L and 1.3L motors? Also like wise for the starter motor?
Series 1 Disco 2 Door
33" Maxxis Mudders
35" Silverstone Extreme
2" Spring Lift
2" Body Lift
Warn HiMount Winch
Top
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Re: Sierra Engine mounts

Post by BlueSuzy »

Don't think so
Don't think so
:D

Mainly because they are a different series (F10 Vs G13) engine that will have different bolt patterns over the blocks. The older suzuki 1L gearbox bellhousings are different so the starters will probably be too, From memory the motor/solinoid are the same, but the 1L bolt up pattern are wider between holes
I am Tim
Top
Posts: 132
Joined: Tue Oct 11, 2005 9:13 pm
Location: Springfield

Re: Sierra Engine mounts

Post by big wheel sigma »

Cheers
Series 1 Disco 2 Door
33" Maxxis Mudders
35" Silverstone Extreme
2" Spring Lift
2" Body Lift
Warn HiMount Winch
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest