Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

D22 Bullbar, problems ???

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 278
Joined: Sat Sep 27, 2003 4:17 pm
Location: Central Coast NSW

D22 Bullbar, problems ???

Post by big38l »

My brother recently purchased a bullbar for a D22 Navara for a reputable offroad supply shop. Problem is, it doesn't fit. The spacing is out by half an inch either side of the frame rail to the bar brackets.

Is there a difference in frame widths for the -07 models (which it says on the box) and the 2010 models (which he has). He was told by the shop it would fit.
85 4SKINNER , totally stock.(Lie ;-) )

Black Chevy Blazer 454 big block , broken diff (True :-( )
Posts: 175
Joined: Tue Apr 27, 2010 6:29 pm
Location: NSW

Re: D22 Bullbar, problems ???

Post by patrol_maverick »

The 07 model is built in Japan, and the 2010 model may be built in Thailand (can't remember the change date exactly). There is a few differences between the two models. A lot of differences between Spain/ Thai D40's too.
Wanted:
-FG Falcon sump & oil pickup (6 cylinder)
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Re: D22 Bullbar, problems ???

Post by tweak'e »

btw small tip bit, 07 is the only year d22 where not made. 06 was the last of the jap d22's.
Posts: 3189
Joined: Thu Mar 04, 2004 1:11 pm
Location: Jimboomba

Re: D22 Bullbar, problems ???

Post by BIG GQ »

My08 released January 2007

As said there is a fair difference between Jap built and Thai built D22's
Cheers
Linc

[quote="chimpboy"]Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'[/quote]
Posts: 39
Joined: Sun Nov 18, 2012 7:08 pm

Re: D22 Bullbar, problems ???

Post by jackass »

can be thai or jap made ,, c if the seller has the spacer plates that sometimes come with the bar kit . the gap is quite normal
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests