Outer Limits 4x4 Board

My brother recently purchased a bullbar for a D22 Navara for a reputable offroad supply shop. Problem is, it doesn't fit. The spacing is out by half an inch either side of the frame rail to the bar brackets.

Is there a difference in frame widths for the -07 models (which it says on the box) and the 2010 models (which he has). He was told by the shop it would fit.

The 07 model is built in Japan, and the 2010 model may be built in Thailand (can't remember the change date exactly). There is a few differences between the two models. A lot of differences between Spain/ Thai D40's too.

btw small tip bit, 07 is the only year d22 where not made. 06 was the last of the jap d22's.

My08 released January 2007

As said there is a fair difference between Jap built and Thai built D22's

can be thai or jap made ,, c if the seller has the spacer plates that sometimes come with the bar kit . the gap is quite normal