Has anyone made, or got a simple snorkel design they used on there 40 that I could possibly pinch. I know it’s not hard to make em, just looking for a bit of info.
Regards
James
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Plumbers snorkel for a 40
Moderators: toaddog, Elmo, DUDELUX
Plumbers snorkel for a 40
Nice gq swb ute chop with a huffer for the good times
Im here for the sausage!
t
tiger, pay your local exhaust joint a visit.
then decide, normal pipe or a nice polished staino job-$130i paid.
then get brackets made and plumb it onto your car.- if you figure out a good solution here let me know, mine is sitting on the floor at home still!
oh and i actually bought the top unlike most people. it was 30 bucks from a filter shop.
then decide, normal pipe or a nice polished staino job-$130i paid.
then get brackets made and plumb it onto your car.- if you figure out a good solution here let me know, mine is sitting on the floor at home still!
oh and i actually bought the top unlike most people. it was 30 bucks from a filter shop.
Yeah i was thinking of that (pay your local exhaust joint a visit), But i dont have $130 to spend on it ATM, all my cash is going into the 2H motor atm.
+ i had some PVC floating around so it kind of made sence, and i just realised the Hi-lift jack going to be a pita, because it mounts straight up the side of the 4wd, so its going to be in the way.
Brackets would be eas, you only need one at the top, and one that holds it to the guard. Once its inside the eng-bay its easy, just use some flexible pipe....... much the same as pat has on Otis
+ i had some PVC floating around so it kind of made sence, and i just realised the Hi-lift jack going to be a pita, because it mounts straight up the side of the 4wd, so its going to be in the way.
Brackets would be eas, you only need one at the top, and one that holds it to the guard. Once its inside the eng-bay its easy, just use some flexible pipe....... much the same as pat has on Otis
Nice gq swb ute chop with a huffer for the good times
Im here for the sausage!
t
yeah i was going to get some flexi hose gear off my local 4x4 joint....
but, the pipe weighs a fair amount. shes 3 inch. its suprising how heavy it is. i was going to go like 4 brackets, but then i thought well if they could clamp around it, and if they were staino that would come up a trick.
so i am on the case but not too sure of what will work and what will look nice.
bit worried about nudging a tree etc and ripping the snorkel off.
PVC could ne a winner though. light and cheeeep!
but, the pipe weighs a fair amount. shes 3 inch. its suprising how heavy it is. i was going to go like 4 brackets, but then i thought well if they could clamp around it, and if they were staino that would come up a trick.
so i am on the case but not too sure of what will work and what will look nice.
bit worried about nudging a tree etc and ripping the snorkel off.
PVC could ne a winner though. light and cheeeep!
thanks very much guys, thats what im talking about 
Who is online
Users browsing this forum: No registered users and 0 guests