Outer Limits 4x4 Board

I have a 1992 Range Rover and it's all over the road. I have a 2-1/2 inch bodylift, 2 inch suspension lift.

I have off centred bushes in the front trailing arms. I spoke to LRA Automotive and they suggested that I realign the swivel-balljoint which would bring the diff back to factory standard.

Does anyone know of a kit that I can install to realign the diff to factory standard angle?

If you rotate the swivel balls makes sure to remove the castor bushes. Have the castor bushes been installed correctly?

Check the rear trailing arm bushes as well.

or the rear trailing arms in general, i've broke and bent a few.