Anyone know who carries spares for these old girls.
Got to find the washer that goes between the bearing and high speed gear on the front output shaft. A workshop rebuilt it years ago and the owner didn't take it back.
The rear output shaft moves backwards and forwards about 6mm, because with the spacer missing the bearings don't seat in the cups.
I'v tried 3 cruiser parts shops, wreckers and Toyota, no luck. Worst case I buy a stuffed transfer for parts.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
HJ45 transfer parts
Moderators: toaddog, Elmo, DUDELUX
Re: HJ45 transfer parts
don kyatt should be able to help you out. they have rebuild kits for the transfers i'm pretty sure. Might be hard pressed if its the older single peice transfer though.. but worth a shot anyway.
Re: HJ45 transfer parts
Got it sorted, only took about 10 phone calls, found a gearbox mob in Toowoomba
Who is online
Users browsing this forum: No registered users and 0 guests