Outer Limits 4x4 Board

Anyone know who carries spares for these old girls.

Got to find the washer that goes between the bearing and high speed gear on the front output shaft. A workshop rebuilt it years ago and the owner didn't take it back.

The rear output shaft moves backwards and forwards about 6mm, because with the spacer missing the bearings don't seat in the cups.

I'v tried 3 cruiser parts shops, wreckers and Toyota, no luck. Worst case I buy a stuffed transfer for parts.

don kyatt should be able to help you out. they have rebuild kits for the transfers i'm pretty sure. Might be hard pressed if its the older single peice transfer though.. but worth a shot anyway.

Got it sorted, only took about 10 phone calls, found a gearbox mob in Toowoomba