I was reading something in the latest 4wd action mag they were talking about putting an insert/sleeve in the panhard bar when replacing the bush to stop the bushes twisting on them self's, does anyone have any more info on this like inner diameter of insert?
cheers Shane
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
sleeving/ panhard rod/bar
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Re: sleeving/ panhard rod/bar
chips59 wrote:I was reading something in the latest 4wd action mag they were talking about putting an insert/sleeve in the panhard bar when replacing the bush to stop the bushes twisting on them self's, does anyone have any more info on this like inner diameter of insert?
cheers Shane
There's your first mistake
More info would help.
What vehicle are you interested in?
Most bushes have a sleeve/crush tube bonded in the rubber (loose sleeve with poly bushes) the sleeve stops bolts being over-tightened and crushing mounting brackets, it also locates the bush within the mounting brackets.
The sleeve also means any load on the bush is spread over a larger surface area compared to pushing or twisting against a relatively thin bolt
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Re: sleeving/ panhard rod/bar
Sorry, GU patrol 2000 4.2TD wagon. I have the new genuine bushes ready to go in but read this before I had a chance to fit them so thought I would check it out.
The bushes I have have a tube inside them as you say but none on the outside like a caster bush, the bush is very soft so can see why you would want to make it a tight fit when inserting it but just wanted more info.
cheers Shane.
The bushes I have have a tube inside them as you say but none on the outside like a caster bush, the bush is very soft so can see why you would want to make it a tight fit when inserting it but just wanted more info.
cheers Shane.
Re: sleeving/ panhard rod/bar
I've never had any issues with these bushies have you ?
4wd action print a lot of crap so take what they say with a pinch of salt.
4wd action print a lot of crap so take what they say with a pinch of salt.
Anything is possible, it just comes down to time and money.
Ferals build www.outerlimits4x4.com/ftopic164570.php
Ferals build www.outerlimits4x4.com/ftopic164570.php
Posts: 689
Joined: Sat Oct 09, 2010 5:12 pm
Joined: Sat Oct 09, 2010 5:12 pm
Location: SMUGGLING COOOOOKIES ACROSS THE MEXICAN BORDER
Re: sleeving/ panhard rod/bar
fixedAFeral wrote:I've never had any issues with these bushies have you ?
4wd action print a lot of REPEATED...REPEATEDLY crap over and over again..... take what they say with a pinch of salt.
fixed
fixed
fixed
ooh I should work for them...
ooh I should work for them.... HA HA HAA
cut and paste editing and stories at its finest
AUSTRALIA
WORTH LOOKING AT WORTH LOOKING AFTER
WORTH LOOKING AT WORTH LOOKING AFTER
Re: sleeving/ panhard rod/bar
fixed for you FeralAFeral wrote:I've never had any issues with these bushies have you ?
4wd action print a lot of crap consistently so take what they say with a pinch of salt as they constantly make mistakes in there articles.
but never heard anything about that the bushes are fine just need replacing every now and agin
Who is online
Users browsing this forum: No registered users and 1 guest