Hilux rear axle bearing
Posted: Mon Aug 02, 2004 7:32 pm
Is there an easy way to remove the rear axle bearings on a hilux 
I got one off using angle grinder, oxy, big hammer/ chisel and 20 ton press
and still managed to bend the backing plate
The old bearing was absolutly stuffed, badly pitted with a big crack around the outer race so I had better do the other one while I'm at it.
thanks, Graeme.
I got one off using angle grinder, oxy, big hammer/ chisel and 20 ton press
and still managed to bend the backing plate
The old bearing was absolutly stuffed, badly pitted with a big crack around the outer race so I had better do the other one while I'm at it.
thanks, Graeme.