Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hilux rear axle bearing

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 343
Joined: Fri Mar 19, 2004 8:19 pm
Location: Lalalty NSW (or is that VIC?)

Hilux rear axle bearing

Post by HIL01X »

Is there an easy way to remove the rear axle bearings on a hilux :?:
I got one off using angle grinder, oxy, big hammer/ chisel and 20 ton press
and still managed to bend the backing plate :x
The old bearing was absolutly stuffed, badly pitted with a big crack around the outer race so I had better do the other one while I'm at it.
thanks, Graeme.
Top
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Post by tomsoffroad »

Heat it with gas, the bearing should expand and come loose.
Where the f#@k did that come from
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 0 guests