Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Welcome on board drew.....now post some pic's already!
drew wrote:Currrently running 89 soft top with 4agze, sprinter t50 5spd,rhopper series 3, 33-12.5 mud terrains,calmini 5inch lift kit [yeah i know nobody likes it the fangs but it has better approach than rears up front with chassis extension]. I might try & do build up thread on the next 2 zuks when some of the bits turn up from the US. p.s hello to everyone as i'm new to the forum.
Looks like I will be able to compare the ome ruf against the calmini lift!
How did you fit the 33's without moving the diff forward?
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
DeWsE wrote:How did you fit the 33's without moving the diff forward?
I didn't move my diff when I ran 33's. with only 3 or 4" lift, they rubbed gently all over.
no offence but did u take it off road?
yeah, i took it to toolangi a few times, went down the steps, and rocky trail. no lockers, went good. towards the end, the standard clutch just couldnt hack it any more. BIGSTEVE's mate bought it off me.... maybe he knows if it was ok?
DeWsE wrote:How did you fit the 33's without moving the diff forward?
I didn't move my diff when I ran 33's. with only 3 or 4" lift, they rubbed gently all over.
no offence but did u take it off road?
yeah, i took it to toolangi a few times, went down the steps, and rocky trail. no lockers, went good. towards the end, the standard clutch just couldnt hack it any more. BIGSTEVE's mate bought it off me.... maybe he knows if it was ok?
It went OK considering the lack of gearing and power, the front clip is now on my zook
Thanks for the welcome.
the diff has moved foward an inch,the rest of the clearance was from creative use of the 9in angle grinder.
come have a look if you like nicber knows where i live.
Did a bit of damage on sunday at mundaring,dents in rear housing,snapped off a valve & sheared the f/left locking hub bolts,the 12mm head ones all six of them it was a pain to fix in the dark.
Ill post some pics when i work out how.
sorry i'm so late replying i had to go to sydney for a week.[/img]
I didn't move my diff when I ran 33's. with only 3 or 4" lift, they rubbed gently all over.
