Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

350 Chev - Head Rebuild

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 232
Joined: Mon Mar 01, 2004 3:42 pm
Location: {Sydney}

350 Chev - Head Rebuild

Post by greenfourby »

Hi

Hoping someone can offer some advice on swapping the heads on a 350 Chev motor.

I have the new heads and all the gaskets etc and I have re-build engines before but I need to find all the torque settings etc for the head and manifold bolts etc.

Anybody have any advice

Cheers
[url]http://www.my4x4.com.au[/url]
Top
Posts: 361
Joined: Sat Mar 06, 2004 11:09 pm
Location: Western Australia

Contact:
Contact toyrex

Post by toyrex »

Head bolts 65 lb manifold bolts 35 lb
Top
Posts: 232
Joined: Mon Mar 01, 2004 3:42 pm
Location: {Sydney}

Post by greenfourby »

Thanks for the info
[url]http://www.my4x4.com.au[/url]
Top
Posts: 428
Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia

Post by 2car »

Tightening patterns are important too. Do a google search - there are some great diagrams available.
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.

'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
Top
Posts: 232
Joined: Mon Mar 01, 2004 3:42 pm
Location: {Sydney}

Post by greenfourby »

I spent ages searching google but did not find anything really technical, if you have any sites that you can recommend then that would be appreciated

Cheers

Rob
[url]http://www.my4x4.com.au[/url]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests