Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rocker cover leaks

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

rocker cover leaks

Post by muppet_man67 »

I had a slow leak at the back of the rocker cover. so I checked the gasket and tightened it up. went for a drive and after about 20 kms oil starts pissing out everywhere. I then recalled hearing someone say that this happens if they are over tightened. Is the rocker cover stuffed, or do I just need to loosen it off?
Thanks
Top
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Re: rocker cover leaks

Post by -Mick- »

muppet_man67 wrote:I had a slow leak at the back of the rocker cover. so I checked the gasket and tightened it up. went for a drive and after about 20 kms oil starts pissing out everywhere. I then recalled hearing someone say that this happens if they are over tightened. Is the rocker cover stuffed, or do I just need to loosen it off?
Thanks


Your cover won't be stuffed just your gasket. Replace it won't cost u much at all ;)
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

mine was between 8 and 12 bucks for a replacement from my local autobarn (i know - i'm embarrassed about shopping there)
DMA Founding Member #1 - Now Retired
Top
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

greg wrote:mine was between 8 and 12 bucks for a replacement from my local autobarn (i know - i'm embarrassed about shopping there)


Autobarn :roll: ricers auto shop :finger:
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

-Mick- wrote:
greg wrote:mine was between 8 and 12 bucks for a replacement from my local autobarn (i know - i'm embarrassed about shopping there)


Autobarn :roll: ricers auto shop :finger:


that's the reason i shop there... i'm a ricer. :cool:
DMA Founding Member #1 - Now Retired
Top
Posts: 160
Joined: Thu Feb 19, 2004 9:32 pm
Location: Nelligen via Batemans Bay

Re: rocker cover leaks

Post by nelligen »

muppet_man67 wrote:I had a slow leak at the back of the rocker cover. so I checked the gasket and tightened it up. went for a drive and after about 20 kms oil starts pissing out everywhere. I then recalled hearing someone say that this happens if they are over tightened. Is the rocker cover stuffed, or do I just need to loosen it off?
Thanks

are you sure it's the rocker cover leaking, mine looked like that ,but ended up being the o ring behind the distributor drive (20 cents)
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Re: rocker cover leaks

Post by HRZOOK »

nelligen wrote:
muppet_man67 wrote:I had a slow leak at the back of the rocker cover. so I checked the gasket and tightened it up. went for a drive and after about 20 kms oil starts pissing out everywhere. I then recalled hearing someone say that this happens if they are over tightened. Is the rocker cover stuffed, or do I just need to loosen it off?
Thanks

are you sure it's the rocker cover leaking, mine looked like that ,but ended up being the o ring behind the distributor drive (20 cents)


Yeah I have this Prob too.

Daryl from this Forum is getting me some Orings from Suzuki
Thanks D ;)

HRZOOOK
Top
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Post by muppet_man67 »

yea its definatly the rocker cover, I thought it was the oring but when I pulled the rocker cover off to check it It was definatly leaking from the rocker cover.
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Post by mud4b »

correct...do not over tighten the bolts...nip them up untill they are firm then torque them to 7 ft/lbs......another half turn...

use a new gasket and use silicon around the camshaft rise...
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Post by muppet_man67 »

I replaced the gasket yesterday. It was split in half. ;) :D
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests