Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

40# Eureka guards

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 614
Joined: Tue Jul 27, 2004 7:47 pm
Location: Penrith

40# Eureka guards

Post by UZJ40 »

Has anyone fitted and had dramas with the Eurka fiberglass gaurds.

i have tried fitting some 150mm larger ones on the weekend and they are nearly 50mm out of alignment, pushing everything to the right. :x
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

t

Post by DIRTY ROCK STAR »

i will be curious to see the outcome of these. the thought had crossed my mind. so be sure to post up more info when you work it out.
sorry im no help.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Posts: 860
Joined: Mon Aug 02, 2004 3:11 pm
Location: AUS

glass guards

Post by scotto »

i built a body with fibreglass panels from noosa fibreglass (qlder)..
have you drilled your holes yet ??
i found the best way to set them up was to not to bolt the whole front end go overboard with clamps - there were shadows for where you "should bolt them" but the best thing about glass is you can cut slots in it as much as you want - just go the right direction..i may be wrong but i think ken gets his guards from alan in noosa so they should be close - just drill them out sideways...you can always put a rubber beading in place if you have gone too far....TRUST ME
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests