Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Coil spacers
Moderators: toaddog, Elmo, DUDELUX
Coil spacers
looking for 3 inch coil spacers for bundera, have been told by one place u cant get em, but i want some, does anyone know what cars have the same size coils front and rear as a bundera?? have been thinking that 4 runners with coil rear end may have the same size.......any ideas??
FJ 73, army green ,snorkel, high mount, dual bats,draws,
80UTE wrote:80 front springs are bigger in diameter and wont fit in the spring mounts im pretty sure the front spring from a 78-79 series cruiser should fit.
Wally
eh? not in my experience!
80 front springs are the same diameter within a few mm as bundera rears and fit perfectly in the bundera rear mounts. the bundera front mounts are just big enough to squeeze 80 fronts in there too, they rub a little bit on the chassis on full articulation but work pefectly well and make a dirt cheap lift for bundera.
cheers
Brian
Free air locker to the first 20 callers!
I thought 80 ser springs would be way to heavier coil to put in a bundy? Like the ride would be rough as? Please correct me if I am wrong.. I am looking at lifting mine a little bit more than it is at the front now because mounting my winch has dropped the front end. I tried to get spacers for the front but no one makes em for the bundy.. So I am looking at making them myself, as I dont need a 6 inch lift spacers would do just fine. Besides that, a short wheel base dosent need the lift a long wheel base does to clear things... With the hight mine is now I get over the same rock steeps as a patrol or landcruiser with 4 to 6 inch lift... and I still dont have lockers fitted...
Chicks dig dents... Just havent found one that does yet!
Who is online
Users browsing this forum: No registered users and 69 guests