Page 1 of 1
G52 Bellhousings (and W series)
Posted: Fri Aug 20, 2004 2:18 pm
by ToNkA
I need to know what bellhousings bolt up to the G52Box, as I need one to fit the 1ggze engine. I know that the 1ggze bolts up the g52 as a mates bundy bolts up, but he didnt do the conversion and aint sure what was used.
Anyone out there know anything?
Can someone tell me about W series boxes and their difference to the G52? Someone said that I can use the W series bellhousing on my G52 and it will bolt to the 1ggze.
Posted: Fri Aug 20, 2004 6:23 pm
by PSI3y
g52 has different gear ratios to the w56/57/58 and i dont dont know much about different strength levels.
http://www.4wd.net.nz/suprasurf_part2.htm has the three compared, im pretty sure that the one which he is talking about that doesnt fit the m series is the one for you.(the middle one)
they should be easier to find than the m series.
Posted: Sun Aug 22, 2004 1:18 pm
by tomsoffroad
Was the 1g-gze a manual? If so its bellhousing will bolt up to the g52 gearbox.
Posted: Sun Aug 22, 2004 2:28 pm
by slowhilux
The 1GGZE never came manual from the factory, only auto. Both the 1GGTE and 1GGE came as manual and auto
Posted: Sun Aug 22, 2004 3:53 pm
by tomsoffroad
In that case I'd be willing to bet (ziltch) that the 1g-gze and the 1g-geu share the same block and crank.
Send Mike (SupraSurf) an email via his website, he'll clear the matter up.
Posted: Sun Aug 22, 2004 4:22 pm
by slowhilux
All the 1G series share the same block/bellhousing bolt pattern, but the cranks are different (same flywheel mounting tho).
Tonka,
ddeane on toymods has a 1G bellhousing for sale, might pay to send him a private message
Posted: Sun Aug 22, 2004 4:32 pm
by ToNkA
I got one thanks.
Posted: Sun Aug 22, 2004 8:46 pm
by BUNDERA
Hey Tonka,
The 1GGTE engine that I put in my bundy previously used the w-series box and the bellhousing bolted straight up to my G52.
1GGTE Engine -> 1GGTE Bellhousing -> G52 Gearbox....etc
The bundy had a 22R engine, 2.4L Petrol.
Cheers Mate.
Nick