Page 1 of 1
EF Falcon fans in to RR?
Posted: Sat Sep 04, 2004 8:14 pm
by LRHybrid100
G'day Guys,
I know there are some of you out there that have put in EL fans, but I have a set of EF fans - think they are the same???
Does anyone have any details on how they fitted them?
Do I need to trim much off?
Where do I secure them to the radiator?
THX in advance
LRH.
Posted: Sun Sep 05, 2004 1:00 am
by Jay
Hey LRH
I m intersted in upgrading the cooling on my disco?
Am I better off going with a bigger radaitor or chnging fan?
Appreciate any detail about location and performance of Falcon fans.
Thanks
Jay
Posted: Sun Sep 05, 2004 5:01 pm
by amtravic1
I am running EL/EF fans. on my Rangie. Just need a piece of 25 mm tube welded to the top of the radiator and a piece of 25 mm flat welded to the bottom shroud brackets. You may need to trim some plastic from the fans where the radiator hoses fit. Its an easy .5 hour job to fit the fans plus an hour or so for the wiring. As far as I know EL/EF fans are the same apart from the electrical plugs.
Ian
Posted: Sun Sep 05, 2004 6:29 pm
by HSV Rangie
http://www.cmr.uq.edu.au/~rotor/the_she ... is_rangie/
my rangie engine conversion.
It uses ford el fans no problems.
now has stock rad fitted and is working well.
regards
Michael.
Posted: Sun Sep 05, 2004 6:29 pm
by LRHybrid100
one of the fans seems to run smoothly as its pretty free and the other is quiet stiff to turn by hand.
Are they supposed to be like this?
LRH
Posted: Sun Sep 05, 2004 7:20 pm
by TuffRR
HSV Rangie wrote:
now has stock rad fitted and is working well.
Michael - what happened to your bling aluminum radiator???
Posted: Sun Sep 05, 2004 7:30 pm
by HSV Rangie
DONT ASK
Corrosion.
not electo;isis.
NOT HAPPY JAN.