got leak? oil's flowin outta the front of my lil 1.3, looks like it's coming from behind the bottom of the timing belt area...
has been suggested to me that it's a crankshaft seal - was talking to a bearing/seal mob, they think it's listed as a timing belt oil seal, and that the "crankshaft seal" is a big heat resistant one at the rear of the engine. the one they think is right is fairly small, maybe 50-60mm across.
is this the right seal? someone should know cos it seems to be a fairly common leak...
cheers boys!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
crankshaft?? seal
crankshaft?? seal
___,,,,_('o')_,,,,____
part of the newy conspiracy...
part of the newy conspiracy...
Stumped,
When I got mine, I asked for the crankshaft seal and the camshaft seal ( may as well do both if you've got the belt off ! ) from Suzisport and got the right ones.
They are fairly small, only about 500mil side to side.
Check the tensions of all the bolts under the timing belt cover when you're in there as I found three that were fairly loose
Hope this helps
When I got mine, I asked for the crankshaft seal and the camshaft seal ( may as well do both if you've got the belt off ! ) from Suzisport and got the right ones.
They are fairly small, only about 500mil side to side.
Check the tensions of all the bolts under the timing belt cover when you're in there as I found three that were fairly loose
Hope this helps
Last edited by roadrunner on Thu Sep 16, 2004 7:37 pm, edited 1 time in total.
[quote="barnsey"]smoked Elle McPherson, even though I didn't inhale[/quote]
[url=http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?p=765579&highlight=#765579/]Roadrunners Hilux[/url]
[url=http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?p=765579&highlight=#765579/]Roadrunners Hilux[/url]
roadrunner wrote:Stumped,
When I got mine, I asked for the crankshaft seal and the camshaft seal ( may as well do both if you've got the belt off ! ) from Suziworks and got the right ones.
They are fairly small, only about 500mil side to side.
Check the tensions of all the bolts under the timing belt cover when you're in there as I found three that were fairly loose
Hope this helps
u mean 50mm diameter?
___,,,,_('o')_,,,,____
part of the newy conspiracy...
part of the newy conspiracy...
only about 500mil side to side.
Damn typo's
Just got home and measured one up
Outside diameter is 47 mm
Inside diameter is 30 mm
For the 1.6 the camshaft and crankshaft seals are the same. Prob the same for the 1.3 i 'spose
Damn typo's
Just got home and measured one up
Outside diameter is 47 mm
Inside diameter is 30 mm
For the 1.6 the camshaft and crankshaft seals are the same. Prob the same for the 1.3 i 'spose
[quote="barnsey"]smoked Elle McPherson, even though I didn't inhale[/quote]
[url=http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?p=765579&highlight=#765579/]Roadrunners Hilux[/url]
[url=http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?p=765579&highlight=#765579/]Roadrunners Hilux[/url]
BAZOOKED IS RIGHT...THEY ARE THE SAME SEAL.....
THE ONE ON THE BACK IS CALLED THE REAR MAIN SEAL....
THE OTHER ONES ARE THE CRANKSHAFT OIL SEAL AND CAMSHAFT OIL SEAL....
THE ONE ON THE BACK IS CALLED THE REAR MAIN SEAL....
THE OTHER ONES ARE THE CRANKSHAFT OIL SEAL AND CAMSHAFT OIL SEAL....
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
oil leak
hey stumped hows it going ?
ive had two swifts into work with the same problem
there is an alloy plate that bolts behined your timing belt cover
that the front main seal is held in
the 10m bolts that hold it to the block work loose hence the leak. so check them you should be able to tighten most without removing the timing belt cover
if you need a hand drop around my joint im at medowie ill fix it for you
regards daryl
ive had two swifts into work with the same problem
there is an alloy plate that bolts behined your timing belt cover
that the front main seal is held in
the 10m bolts that hold it to the block work loose hence the leak. so check them you should be able to tighten most without removing the timing belt cover
if you need a hand drop around my joint im at medowie ill fix it for you
regards daryl
Who is online
Users browsing this forum: No registered users and 0 guests