Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Will GQ doors fit on MQ

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 147
Joined: Wed Aug 18, 2004 10:25 pm
Location: Forest lake QLD

Contact:
Contact kc_ksom

Will GQ doors fit on MQ

Post by kc_ksom »

Howdy

Just wondering if the GQ doors will fit in my MQ, as you cant buy 1/4 window rubbers, this seems the only thing to do???..

Casey...
Top
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

Yes. :D
NOW ABLE TOO SAY WHAT I WANT WITHOUT FEAR OF LOOSING SALES.
The person who says it cannot be done should not interrupt the person doing it.
Top
User avatar
V8Patrol
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

One can even reskin the MQ door with the GQ skin as MQ skins are hard to get hold of.
There is zero differance betwen the two door skins and there is also zero differance between the door frames either.

The only thing that is differant is the 1/4 window ...... the GQ doesnt have one !

Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Top
Posts: 902
Joined: Wed Jul 21, 2004 5:29 pm
Location: Sydney

Post by stool »

Ive seen GQ`s with 1/4 window`s I think on dx ute`s and wagon`s
GQ with big nuts
Top
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

There is a slight differance on the inside skin but nothing to worry about.
I have been running MQ doors now for 5 years. :shock: I wouldnt cut down a GQ door, too $$$$.
NOW ABLE TOO SAY WHAT I WANT WITHOUT FEAR OF LOOSING SALES.
The person who says it cannot be done should not interrupt the person doing it.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

isnt the mq body and gq body basically the same?
Top
User avatar
V8Patrol
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

Most easilly noticeable thing is that the GQ body sits a few inches further foward on the chassis than the MQ. Its supprising the amount of stuff thats interchangeble

Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Top
Posts: 1040
Joined: Sun Dec 22, 2002 11:15 am
Location: sydney

Post by planb »

can you swap the gq barn doors for mq tail gate and glass ?
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

Cheezy4x4 wrote:There is a slight differance on the inside skin but nothing to worry about.
I have been running MQ doors now for 5 years. :shock: I wouldnt cut down a GQ door, too $$$$.




It depends how much u get the GQ doors 4 ....I have a reasonable set off a SILVER MAV (WELL WAS ;) ) thats featured in 4wd monthly :armsup:


just gotta check and c where is best to cut for sum rock doors .......................people always mentioned that this was ok todo as long as u didnt wreck the side intrusion bars in the door ..............but fark as far as i could see there aint none down the guts of the GQ door ????

A1
[b][i] DAN [/i] [/b]


:silly:
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

A1MAV wrote:
Cheezy4x4 wrote:There is a slight differance on the inside skin but nothing to worry about.
I have been running MQ doors now for 5 years. :shock: I wouldnt cut down a GQ door, too $$$$.




It depends how much u get the GQ doors 4 ....I have a reasonable set off a SILVER MAV (WELL WAS ;) ) thats featured in 4wd monthly :armsup:


just gotta check and c where is best to cut for sum rock doors .......................people always mentioned that this was ok todo as long as u didnt wreck the side intrusion bars in the door ..............but fark as far as i could see there aint none down the guts of the GQ door ????

A1


No side intrusion bars in GQ doors, just have to use the original hinges and locking/striker mechanism to keep them legal.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 329
Joined: Thu Nov 07, 2002 5:24 pm
Location: Brisbane

Post by derangedrover »

MKPatrolGuy wrote:
A1MAV wrote:
Cheezy4x4 wrote:There is a slight differance on the inside skin but nothing to worry about.
I have been running MQ doors now for 5 years. :shock: I wouldnt cut down a GQ door, too $$$$.




It depends how much u get the GQ doors 4 ....I have a reasonable set off a SILVER MAV (WELL WAS ;) ) thats featured in 4wd monthly :armsup:


just gotta check and c where is best to cut for sum rock doors .......................people always mentioned that this was ok todo as long as u didnt wreck the side intrusion bars in the door ..............but fark as far as i could see there aint none down the guts of the GQ door ????

A1


No side intrusion bars in GQ doors, just have to use the original hinges and locking/striker mechanism to keep them legal.


My 89 GQ LWB has got intrusion bars in the front doors.
I thought the ADR became applicable in the early nineties. Cant be buggered checking right now though....

Cheers
Daryl[/b]
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

GQs did come out with quarter window doors in the earlier models, ( OZY1's ) LWB has look a like MQ doors.

GQ bodys are the same physical size except the panels are flared out more to suit the wider GQ track.

Other size u can more or less interchange the bodys ( i.e bolt a GQ body to MQ chassis and Visa versa, You would only have to modify the body monuts but it will look perfect. :cool:

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest