Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

SWB patrol utes

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 27
Joined: Thu Sep 09, 2004 10:44 pm
Location: vic

SWB patrol utes

Post by SWBmav »

I am looking at geting my Swb maverick cut down into a ute, can any body send me some picks of different type of cut down's because i havn't seen many. Also if any body can tell me just how much it cost's to get it done.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: SWB patrol utes

Post by bogged »

Call Sandy at Aus4wd in Bayswater.. hes the guru of it.

Cost.. lots of thousands.
Top
Posts: 2056
Joined: Tue Mar 23, 2004 6:17 pm
Location: Melbourne

Contact:
Contact Big Red Toy

Post by Big Red Toy »

buy me a 9" grinder & i'll do it for free. :D
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
Top
Posts: 82
Joined: Mon Jul 19, 2004 11:47 pm

Post by Justin_M »

MQ body swap? hehe
Top
Posts: 527
Joined: Fri Apr 23, 2004 5:43 am
Location: Auckland, NZ

Post by GQ TROL »

http://forum.patrol4x4.com/photos/index.php?cat=10239

The last 3 pics are of two GQ tray-back utes that kick around on the NZ winch challenge circuit.

Cheers
Mitch
Top
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Contact:
Contact big red

Post by big red »

www.4wdlinksracing.com :D
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Top
Posts: 27
Joined: Thu Sep 09, 2004 10:44 pm
Location: vic

Post by SWBmav »

Thank for the pic's they look great.And i have a 9 inch angle grinder to, and i have throught about doing it myself but i have done a suzuki before and there is alot of work in it. Also i what to keep it a little bit legal to. I've decide on get it cut down into a tub back ute. I am also get a 5 inch spring lift at the same time. so i will post some pic's when I get it done.
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

too easy mate. just don't make it too heavy. a lot of the fellas make the rear tail gate weigh nearly 100kgs. keep it light or you are wasting your time.

cheers mate

bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

It might not hurt to take a good look at an MQ SWB body... if only for ideas, but quite possibly for parts. You could probably do it carefully in a way that would let you use an MQ canopy easily.

Jason
This is not legal advice.
Top
Posts: 27
Joined: Thu Sep 09, 2004 10:44 pm
Location: vic

Post by SWBmav »

I got a MQ tail gate for it for only $50 in good cond.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest