285s on a defender 110

Post by **mabsydney** » Sat Oct 02, 2004 7:57 pm

Would 285/75s fit on my 110 extreme with a 2" OME spring lift?

Any problems? Is the drive chain/axles strong enough?

Post by **lowbox** » Sun Oct 03, 2004 5:40 am

I know people running them without problems, just a bit of rubbing on the rear tray. Not sure if they are legit on the standard rims tho.

The drive train should be fine unless you fit lockers.

Post by **Slunnie** » Sun Oct 03, 2004 1:14 pm

I now of these being run on the procomp 16x8's also with 2". They may give a light touch, not sure.

Post by **Loanrangie** » Sun Oct 03, 2004 2:14 pm

255/85's rub with a 2" lift so unless you have offset rims , they will scrub hard.

Post by **mabsydney** » Mon Oct 04, 2004 3:45 am

thanx for the replies, think I'll stick with my 265/75's then!

Post by **aloa9061** » Tue Oct 05, 2004 4:46 pm

my 285's fit easily with the offfset proomp rims. need 16x8 rims to be legal though and a two inch lift. photos on 4wdlinks under aloa9061

cost rims 165each from nick mannel

Post by **ISUZUROVER** » Tue Oct 05, 2004 4:58 pm

I have 285/75/16 MTR's on my 110 with disco rims with 30mm extra offset. They work fine. the suspension is stock apart from king springs that give it 1-2" lift (estimated).

Post by **mabsydney** » Thu Oct 07, 2004 4:14 pm

aloa9061 I can't find your pics, can you post a link? Thanx

Post by **Slunnie** » Fri Oct 08, 2004 10:35 pm

http://www.4wdlinks.com.au/gallery/aloa9061

Post by **mabsydney** » Sat Oct 09, 2004 3:19 am

thanx

Post by **aloa9061** » Sun Oct 10, 2004 7:14 pm

cheers slunnie

Outer Limits 4x4 Board

285s on a defender 110

285s on a defender 110

rims

s

Who is online