Page 1 of 1
285s on a defender 110
Posted: Sat Oct 02, 2004 7:57 pm
by mabsydney
Would 285/75s fit on my 110 extreme with a 2" OME spring lift?
Any problems? Is the drive chain/axles strong enough?
Posted: Sun Oct 03, 2004 5:40 am
by lowbox
I know people running them without problems, just a bit of rubbing on the rear tray. Not sure if they are legit on the standard rims tho.
The drive train should be fine unless you fit lockers.
Posted: Sun Oct 03, 2004 1:14 pm
by Slunnie
I now of these being run on the procomp 16x8's also with 2". They may give a light touch, not sure.
Posted: Sun Oct 03, 2004 2:14 pm
by Loanrangie
255/85's rub with a 2" lift so unless you have offset rims , they will scrub hard.
Posted: Mon Oct 04, 2004 3:45 am
by mabsydney
thanx for the replies, think I'll stick with my 265/75's then!
rims
Posted: Tue Oct 05, 2004 4:46 pm
by aloa9061
my 285's fit easily with the offfset proomp rims. need 16x8 rims to be legal though and a two inch lift. photos on 4wdlinks under aloa9061
cost rims 165each from nick mannel
Posted: Tue Oct 05, 2004 4:58 pm
by ISUZUROVER
I have 285/75/16 MTR's on my 110 with disco rims with 30mm extra offset. They work fine. the suspension is stock apart from king springs that give it 1-2" lift (estimated).
Posted: Thu Oct 07, 2004 4:14 pm
by mabsydney
aloa9061 I can't find your pics, can you post a link? Thanx
Posted: Fri Oct 08, 2004 10:35 pm
by Slunnie
Posted: Sat Oct 09, 2004 3:19 am
by mabsydney
thanx
s
Posted: Sun Oct 10, 2004 7:14 pm
by aloa9061
cheers slunnie