Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1990 Delica 4WD Gearbox

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 180
Joined: Wed Aug 18, 2004 7:57 pm
Location: packahoonaham

1990 Delica 4WD Gearbox

Post by corkhead »

HI guys,

got a mate with a Delica 4WD Van 1990 and has stripped a gear in his gearbox ... anyone know if its the same gearbox (5 speed) as the L300 VANS.

The running gear looks close to my 90 Paj NG - although i have an auto.

Any input would be great, is a 2.5tdi - the transfer case is fine but the gearbox is stuffed

Cheers
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

It's either a KM145 which was behind all Gen 1 2.6 Paj's and early diesels or the V5M21 alloy jobby found under the later 2.6 and 2.5 diesels.
The years 88-91 were strange changeover years for the Mitsu 4x4's until a lot of things were standardised for the Gen 2 model.
I would check out the compliance plates as this should tell you.
But if I had to bet money I would say the V5M21.......................
I just luv my "clacker Jabber"
Posts: 180
Joined: Wed Aug 18, 2004 7:57 pm
Location: packahoonaham

Post by corkhead »

hi again bitsamissin - you must be the oracle of mitsi knowledge !!!

it is the km145 on the delica but the paj models are a top loader not side (which this is)

what im really needing to know at the moment is if the L300 4wd gearbox would be the same or do you mean the l300 is either the km145 or v5m21

thankyou again for your comments

always appreciated !
Posts: 395
Joined: Thu Nov 06, 2003 4:36 pm
Location: cowtown W.A.

Post by jbell »

corkhead just had the gearbox on my 98 4x4
express rebuilt ,no change from $2900.
didnt help they sent the wrong cluster gear & it
had to be stripped down again after a test drive.
It howled in 2nd gear .
The gear box in those things are pritty small
for a work bus that hauls a fair bit of weight.
They need something a bit beefer.

Good luck !!!!

JEFF
rover money pit on mogs !!!
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests