Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ Carby Query

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 37
Joined: Fri Oct 08, 2004 7:57 pm
Location: Perth WA

GQ Carby Query

Post by GQGasPig »

Hi all,

I am new to this group so be gentle. I have a '91 GQ on Gas/Petrol. I was checking under the bonnet and found this white plastic fitting on the body of the carby near where the throttle cable attaches to the carby. This fitting appears to have a spring on it but does not seeem to do anything as it hads heaps of slack in it.

The GasPig idles and runs fine I'm just curious what this fitting does.

I started the engine and let it idle and moved this white fitting up and done and the idle was not effected.

What does this fitting do and should it be slack?

Your answers would be appreciated.

I took a picture but could not figure out how to post it with the message.

Cheers
GQGasPig
Top
Posts: 309
Joined: Tue Dec 03, 2002 11:43 am
Location: SOMEWHERE IN VICTORIA

Post by TUFF MAV »

By the sound of it i'd say it's the idle up cam for the choke. The screw for the idle RPM may have been wound back & that is why there is so much slack in it.

Kyle
BUGGERED IT'S A TOYOTA THING
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests