Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rear Wheel Arch Inner Guard Flaring?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 116
Joined: Wed Jun 09, 2004 1:54 pm
Location: Floating at Sea

Rear Wheel Arch Inner Guard Flaring?

Post by Deano »

Rear wheel arch inner guards. Can you flare/stretch/pump them wider (ie inwards)?

I dont want to space the bump stops down, as I like having my compression, and dont want to loose the up travel.

I would think that body lifting is not an option, as that part of the guard seems to be pretty perpendicular to the ground so lifting it up wouldnt make any difference

Just live with the rubbing, or are there options. Oh yeah, and a ute chop is outta the question! :?

FYI - GQ LWB, 4" Springs, 35x11.5 'pedes, yota 15x8" rims.

Cheers, Deano
I wish I was hardcore
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

I dont think the rubbing will cause you much concern with that setup. Just touch up the paint from time to time. We all do ;)

Bazzle
Top
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

In the Mav's early days I lifted and tubbed the rear wheel arch to fit the 39.5 Swampers, so it can be done.
NOW ABLE TOO SAY WHAT I WANT WITHOUT FEAR OF LOOSING SALES.
The person who says it cannot be done should not interrupt the person doing it.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests