Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Sliverstone Mt117's

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Sliverstone Mt117's

Post by Guy »

Where doe's a person go to get a set and how much would it be (in vic)

I am talking about the tractor tread looking ones ...

If I can find a set cheap enuff .. I would like to have a play with em, has anyone had much experiance with em, especially when modding the centre rib ??
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 510
Joined: Fri Mar 26, 2004 7:58 pm
Location: vic

Post by mudtoy »

I have raced on the Silverstones for almost five years now...bang for buck they can not be beaten. Price should be around $240 fitted and a thin knife with baby oil will slice the centre out nicely.
The centre rib gives better steering and side slope holding but lifts the tread up off the rocks.
I run mine at 5-8psi without beadlocks and recently won the road registered class of the A4WDMRA (mud racing) for the last season.
Before you spend though...Silverstone have just released a new tyre. Email me at simon@4wdtv.com.au and I will forward a pic...it will blow you away!
www.4wdtv.com.au
SPOA FJ40, 400hp stroker, ARB locked x2, Silverstones, Superwinch, Narva lights, EFS springs, 1284 RTI...
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

mudtoy wrote:I will forward a pic...it will blow you away!

upload the pic to a server and post here?
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Post by Gonzo »

email sent

i'll slap it up on my site once i get it
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Re: Sliverstone Mt117's

Post by hottiemonster »

love_mud wrote:Where doe's a person go to get a set and how much would it be (in vic)

I am talking about the tractor tread looking ones ...

If I can find a set cheap enuff .. I would like to have a play with em, has anyone had much experiance with em, especially when modding the centre rib ??


bid red toy (andrew) from outerlimits runs them, he lives in vic so send him a pm
Gq ute new built
Posts: 510
Joined: Fri Mar 26, 2004 7:58 pm
Location: vic

Post by mudtoy »

Actually, I think he doesn't! He runs the Silverstone MT117 Sports which he bought from Brawn 4x4 03 9798 8522

Show is on tonight!
www.4wdtv.com.au
SPOA FJ40, 400hp stroker, ARB locked x2, Silverstones, Superwinch, Narva lights, EFS springs, 1284 RTI...
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Post by Gonzo »

Last edited by Gonzo on Fri Oct 15, 2004 9:30 am, edited 1 time in total.
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Its a silverstonbe centipede ..

What sorta $$ are we looking at for that rubber ??
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Post by RV80 »

that's some pretty :cool: rubber.

what sizes are they avaliable in?
www.bolsys.com.au
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

cough Simex Centipede cough

what sort of $$$ though?
Gq ute new built
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Re: Sliverstone Mt117's

Post by hottiemonster »

love_mud wrote:Where doe's a person go to get a set and how much would it be (in vic)

I am talking about the tractor tread looking ones ...

If I can find a set cheap enuff .. I would like to have a play with em, has anyone had much experiance with em, especially when modding the centre rib ??


one of my mates that lives near me has put em on his 60 series cruiser. he reckons they are great and picked them up for $100 each and had only done one trip!!!! BARGAIN

i think new he said they are about 220 for a 35

also they are a VERY SKINNY tyre
Gq ute new built
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Post by RV80 »

hottiemonster wrote:cough Simex Centipede cough


so what.
if they come in decent size's and are heap cheaper than the simex.
then woo hoo us. it's all about saving some coin to spend elsewhere.
www.bolsys.com.au
Posts: 510
Joined: Fri Mar 26, 2004 7:58 pm
Location: vic

Post by mudtoy »

OK...Hottiemonster...you are still talking about the MT117 whilst everyone else is talking about the Silverstone MT117 Xtreme. Both tyres are 35x11x16 but Malaysia had asked me to consult on sizes for Australia and I advised 31, 33 and 36x12.5 for 15 and 16s.
Brock sold his old 117s to a mate for $100 each...a bargain. Retail for the 117 is around $240 ...

...but the Xtreme will retail for around $300

Still great value for a 6 ply that combines the benefits of a rag/bias belted tyre with those of a tubeless tyre!

I have also secured exclusive sales for the tyre through Brawn 4x4 in Dandenong. There are only 50 tyres in this first shipment at the docks now waiting for clearance.
www.4wdtv.com.au
SPOA FJ40, 400hp stroker, ARB locked x2, Silverstones, Superwinch, Narva lights, EFS springs, 1284 RTI...
Posts: 1041
Joined: Wed Jan 07, 2004 1:09 pm
Location: Melbourne, Victoria

Post by Mudzuki »

Nice :cool: Which sizes on the shipment?
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Post by RV80 »

mudtoy you could of advised 35"/16 as well.
www.bolsys.com.au
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

if it's a similar carcas to the older 117 it will be avaliable in a 16
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Post by +dj_hansen+ »

That tyre looks awesome! The TSL/SX side-wall bits look the goods too... :armsup:

Mudtoy.. do you know the going price on the 33 x 12.5 x 15 MT-117 Sport?
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

whats the tread depth compared to a simex ET ?
Gq ute new built
Posts: 510
Joined: Fri Mar 26, 2004 7:58 pm
Location: vic

Post by mudtoy »

still waiting for mine to be unloaded off the boat so I can't give full feedback...will be as deep as simex though.

I did not advise for the 35s for three reasons. Firstly, 35x11x16 is already made and is waiting on the docks! Secondly, because of CCDA rules, 36 is now a more popular competition size and finally, Silverstone has a track record of being slow and limited with tyre sizes...I didn't want to push it!
www.4wdtv.com.au
SPOA FJ40, 400hp stroker, ARB locked x2, Silverstones, Superwinch, Narva lights, EFS springs, 1284 RTI...
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Post by RV80 »

does anyone know the website details so we can
a read about them?
www.bolsys.com.au
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

it's great to see the entire 4x4 market getting more competition in it .. especially in the areas that you can do yourself like rubber .. and that is looking sweet ..

I am assuming that withthe nice void down the centre the tyre will be able to flex more easily in th tread area than the older 117 ..


Tell customs to get off their backsides and get em cleared so we can hear some war stories about these new shoes from malaysia ..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

They look awsome. Looks like larger spaces between the middle lugs compared to the centipedes.
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

What are the actual sizes and OD's - do you have the specs mudtoy???

The old MT117 (280/85/16) was listed as a 900mm (35.4") diameter - but people I know who used them said they were up to 36".

How about the centipede pattern in a 37 or 38"??? (x16 for me). May not be used in CCDA comps but plenty of other people will want them (me included).
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 510
Joined: Fri Mar 26, 2004 7:58 pm
Location: vic

Post by mudtoy »

Sports is still not landed in a 15 but the 33x12.5x16 Sports is around $240.

Specs and web details are still unavailable as the tyre has been a well guarded secret. Malaysia contacted me around 6 weeks ago with limited info and specs and trye dealers here were made awares last week. All we have is that one pic...but I will have one on the Brawn stand at the National 4x4 show in melbourne...

Wider centre void with directional fingers

mud scrags between lugs on shoulder

slightly different side biters

Dual construction...tubeless bias.
www.4wdtv.com.au
SPOA FJ40, 400hp stroker, ARB locked x2, Silverstones, Superwinch, Narva lights, EFS springs, 1284 RTI...
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

love_mud wrote:Its a silverstonbe centipede ..
Talk about breach of copyright.. If Mickey Thompson spat it with Mudzillas, Simex will be in court before they hit the streets
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

ISUZUROVER wrote:May not be used in CCDA comps but plenty of other people will want them (me included).
you could say that about 35s too...
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

bogged wrote:
love_mud wrote:Its a silverstonbe centipede ..
Talk about breach of copyright.. If Mickey Thompson spat it with Mudzillas, Simex will be in court before they hit the streets


Mongrels...

They are on the market and have been for ages, so why will it be any worse than the silvers?

Dave :D
Land Rover Discovery - GQ conversion underway
Posts: 2056
Joined: Tue Mar 23, 2004 6:17 pm
Location: Melbourne

Post by Big Red Toy »

Image
Shit i want them :shock:
]
Last edited by Big Red Toy on Thu Jan 06, 2005 9:59 pm, edited 3 times in total.
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Post by RV80 »

you could of resized the picture.
www.bolsys.com.au
Posts: 2056
Joined: Tue Mar 23, 2004 6:17 pm
Location: Melbourne

Post by Big Red Toy »

bite my shiny metal ass :finger:
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
Post Reply

Who is online

Users browsing this forum: No registered users and 69 guests