Suspension Lift on NP

[Fatpaj]

Will be buying a NP GLS by the end of next week and looking at a 2"lift tried ARB only they quoted max 35mm on a good day but could be as low as 20mm no one else has done one before where do go, they all could help me with the bullbar and winch

Fatpaj

[Bitsamissin]

Tough Dog do a great lift kit for the NM/NP Paj.
These are sold through the Opposite Lock chain but you can get them through other 4x4 outlets.
I like the 75mm HD lift particularly if you fit a bullbar/winch and carry a load.
These kits are the most expensive but are tried and proven the OL test NM has clocked up over 150,000K's with the 75mm lift kit fitted without any drama's.

[Fatpaj]

Thanks of the info will give them a call today and drop off the car, will look at the 75mm lift.

Fatpaj

[PED04]

You don't say where you are, but I've been happy with my lift using Bilsteins and custom Lovells; just over 35mm in front (but can be higher; will do so after bullbar), and 50mm rear. Could have gone higher, but everything is a compromise, ie harsher ride with certain springs. You also don't want to be too close to bumpstops, or the ride will be harsh.

[Fatpaj]

It's here at last well at the dealer any way, the truck looks great, about 75mm lift, but it should sink about 5mm we used the tough dog kit the bullbar and winch sets the truck off well will be collecting on Monday arvo

[Begbie]

Make sure you post some pics...

[Fatpaj]

Will be going for a run on Saturday at Johnson Road should get some then