Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
whining noise
Moderator: Tiny
whining noise
For the last 5 months there's a whining noise when coasting. Last weekend I took my rear driveshaft apart to clean it and put some new grease on the splines. While putting it together I noticed some play in the slider radial to the rotation axis. Could that be the reason for whining? Splines look ok. Got the two pieces correctly phased and there's no play at the U-joints. Never seen any driveshaft before with radial play in the splined section of it....
smokin' is bad, especially for your curtains
----------------------------------------------------------
F20 Resin Top, 2.5" lift , 31" Grabber AT's
----------------------------------------------------------
F20 Resin Top, 2.5" lift , 31" Grabber AT's
Who is online
Users browsing this forum: No registered users and 0 guests