Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

what size and offset rims??

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 485
Joined: Wed May 05, 2004 8:04 am
Location: parramatta

what size and offset rims??

Post by viperguy »

hey..i just got some 35x10,5x15 simex pedes and was just after some info on suitable rim sizes..
the tyre says recommended rim width is 8.5 but im thinking that as 31x10.5's come on 15x7's on the standard vehical can i use that size rims on the simex tyres? also which offset would be the best to run so guard rubbing issues would be minimised? i have 5 inch lift and front radius arm spacers so rubbing should be ok unless i stuff up on offsets..any ideas would be greatly appreciated..
Top
Posts: 1041
Joined: Wed Jan 07, 2004 1:09 pm
Location: Melbourne, Victoria

Post by Mudzuki »

An 8.5 inch wide rim usually means an 8 in rim with beadlock (extra 0.5 inch)

Do you want to run beadlocks?

Most manufacturers know what they are talking about.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests