Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Grand Vitara Front Diff

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 65
Joined: Sun Aug 22, 2004 3:31 pm
Location: sydney

Grand Vitara Front Diff

Post by Mudboy »

Has any one else had a problem with their front diff on their vitara chewing the bearing out where the CV joint goes in, I have had this problem twice after going through muddy water, and replaced the diff once and now it is stuffed again
Top
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Post by Gonzo »

nope, must just be you...
Top
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Post by Gonzo »

oh wait, Grand Vitara...
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

What year GV? I know there are a few different part numbers for the housings but don't know the differences apart from auto/alloy and manual/cast iron.
Top
Posts: 511
Joined: Thu Oct 31, 2002 8:59 am
Location: Sydney

Contact:
Contact Liam

Post by Liam »

never had a drama with them. are you using quality bearings?
www.bbmotorsports.com.au
Top
Posts: 65
Joined: Sun Aug 22, 2004 3:31 pm
Location: sydney

Grand Vitara

Post by Mudboy »

No it is the diff is standard and y2000 model, the only mod done is a 60mm lift
Top
Posts: 876
Joined: Wed Apr 14, 2004 7:30 pm
Location: Terrigal, NSW

Post by fightara »

Is it bearings on both sides?

If only one, check the mounts- may have cracked and dropped the diff slightly.

The alloy front diff is the reason why I gave up on mine :cry: though I hear that they're fine when replaced with the steel diff.
Top
Posts: 107
Joined: Fri Jan 23, 2004 9:08 am
Location: Brisbane

Contact:
Contact GV_Qld

Post by GV_Qld »

your talking about the passager side? No bearing on the drivers side.

I would think that if it was gritty than it would stuff up the seal on the bearing.

Have not have any problems with mine.

Image
'03 GV
Top
Posts: 65
Joined: Sun Aug 22, 2004 3:31 pm
Location: sydney

Vitara Diff

Post by Mudboy »

It is only the drivers side that gives me issues
Top
Posts: 107
Joined: Fri Jan 23, 2004 9:08 am
Location: Brisbane

Contact:
Contact GV_Qld

Post by GV_Qld »

Their is NO bearing on the drivers side. Just a metal bush that helps support the CV stub axle. If the seal is stuffed grit could be getting into this and wearing it out.
'03 GV
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests