hey all, i dropped in to see Mal today and he asked me to post this. Someone has posted on another site (i don't know who or what site), that the Maxi Drive rear axles for the ROVER type diff (p38, 2002 onwards, NOT salisbury), FITTED TO DEFENDERS, are too short.
Yes they were, by 10mm. They have been corrected and Maxi Drive has tried to contact all the customers to replace them with the correct axles. If you have been missed please contact Maxi Drive on 07 55 303934.
Basicly what happened, Mal first started making axles for the defender with p38 rear in 1999. Yes this is earlier than we got the change over. The order was from the Israeli army for there defender xd's (wolf). They supplied the specs from there own vehicles for Mal to build from. So when we got the change over on the def rear and they were slightly different-10mm- Mal got caught out. As i said this has been corrected and Mal has made the effort, do not hesitate to contact Maxi Drive re this concern if you need to.
cheers, Serg
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Maxi Drive defender rear axles p38
Moderator: Micka
Who is online
Users browsing this forum: No registered users and 0 guests