Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Snapped axel
Moderator: -Scott-
Snapped axel
i have finally done it snapped a axel was wondering are the axels from earlier model paj's interchangable with mine 92 NH 3.0
100series 2002 4.5/LPG
GET YA GEAR OFF ROAD
www.4x4web.com.au/dinos4x4
GET YA GEAR OFF ROAD
www.4x4web.com.au/dinos4x4
Badluck Dino, but unfortunately it is a fact of life with the 3.0 V6, 33"s and a rear locker.
I have broken 2 and Noisey 1 and I know of quite a few others.
We are getting some heavy duty ones made up at the moment.
The early Gen 1 V6 axles are about 1" too short and you need Gen 2 3.0 V6 axles for replacement.
The 3.5 V6 rear axles are substantially larger for obvious reasons.
I have broken 2 and Noisey 1 and I know of quite a few others.
We are getting some heavy duty ones made up at the moment.
The early Gen 1 V6 axles are about 1" too short and you need Gen 2 3.0 V6 axles for replacement.
The 3.5 V6 rear axles are substantially larger for obvious reasons.
I just luv my "clacker Jabber"
Who is online
Users browsing this forum: No registered users and 0 guests