Snapped axel
Posted: Sun Nov 07, 2004 2:47 pm
i have finally done it snapped a axel was wondering are the axels from earlier model paj's interchangable with mine 92 NH 3.0
Badluck Dino, but unfortunately it is a fact of life with the 3.0 V6, 33"s and a rear locker.
I have broken 2 and Noisey 1 and I know of quite a few others.
We are getting some heavy duty ones made up at the moment.
The early Gen 1 V6 axles are about 1" too short and you need Gen 2 3.0 V6 axles for replacement.
The 3.5 V6 rear axles are substantially larger for obvious reasons.