OK guys
i have searched for some info on mq mk rears info but couldn't find what i need to know. i know that they are different between the two models but would like sizes for both.
i need to know bush eye diameter in main leaf
and leaf width.
thinking about running some in the back of the 4runner.
if anyone has any info or useful links i would appreciate it.
cheers joel
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
MQ/MK rear leaf questions
MQ/MK rear leaf questions
DX80 35's twin locked turbo diesel = TANG
www.jaybeecanvas.com
www.jaybeecanvas.com
All MQ/MK leaves are the same width which is 16mm across.
im not 100 percent sure on the spring eye diamters off hte top of my head but will get out the manual tomorrow and have a look.
screwy
im not 100 percent sure on the spring eye diamters off hte top of my head but will get out the manual tomorrow and have a look.
screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Screwy_ScrewBall wrote:All MQ/MK leaves are the same width which is 16mm across. screwy
mmm that doesn't sound right?
Screwy_ScrewBall wrote:im not 100 percent sure on the spring eye diamters off hte top of my head but will get out the manual tomorrow and have a look.
screwy
that would be great
DX80 35's twin locked turbo diesel = TANG
www.jaybeecanvas.com
www.jaybeecanvas.com
woops sorry my baaad.....
dont know where in the hell i got 16mm wide from. thats smaller than a zooks leaves.
They are 50 mm Wide.
my bad. i must have been thinking about something else when i said the previous measurement.
screwy
dont know where in the hell i got 16mm wide from. thats smaller than a zooks leaves.
They are 50 mm Wide.
my bad. i must have been thinking about something else when i said the previous measurement.
screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
The size of the leafs is the same, but the newer ones have the rear axle located 3cm further back. So the difference between the springs is the location of the king pin hole. There's also some different leaf packs with 3 up to 8 leafs depending on market on model.
'04 Nissan Terrano 3.0Di ZD30 *pimped*, some Zooks & '87 GQ
God of Magnificant Ideas!
Screwy_ScrewBall wrote:woops sorry my baaad.....
dont know where in the hell i got 16mm wide from. thats smaller than a zooks leaves.
screwy
You had ya hand in ya pants again didnt ya !
spring width is 60mm
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
V8Patrol wrote:Screwy_ScrewBall wrote:woops sorry my baaad.....
dont know where in the hell i got 16mm wide from. thats smaller than a zooks leaves.
screwy
You had ya hand in ya pants again didnt ya !
spring width is 60mm
didnt have hands in pants..........
also both of my patrols measure 52mm on the spring width im sorry kingy.
front and rear the same. and my SOA rig has MK front leaves and MQ rear leaves.
My older MQ has newer enforcer ones and they measure 50mm also.
But.
Im nearly positive that the ones i pulled out of the MK LWB me and shawn stripped, were measured at 60mm.
anyone share some light??
i couldnt be asses getting up and getting the manual
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
springs
yep 60mm for both (sorry screwy)
Re: springs
DR Frankenstine wrote:yep 60mm for both (sorry screwy)
nah dude i just went out like 20 mins ago and measured with a ruler at 50mm.
and double checked it twice.
unless the ruler is farked. AND I DID check it properly.
they are about 53mm.
screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
God of Magnificant Ideas!
Big Red Patrol...... front = 60 mm, rear = 60mm.
Littler Red ...... front = 60 mm, rear = 60mm.
Old Yella ...... front = 60 mm, rear = 60mm.
Yella ...... front = 60 mm, rear = 60mm.
Whitey ...... front = 60 mm, rear = 60mm.
D ethnic person mobile ...... front = 60 mm, rear = 60mm.
All 6 of mine have differant styled spring paks fitted but they all measure 60mm wide.
you havent cut ya ruler off at the 10mm mark by any chance ?
So where did ya get the 16mm from then ???
Littler Red ...... front = 60 mm, rear = 60mm.
Old Yella ...... front = 60 mm, rear = 60mm.
Yella ...... front = 60 mm, rear = 60mm.
Whitey ...... front = 60 mm, rear = 60mm.
D ethnic person mobile ...... front = 60 mm, rear = 60mm.
All 6 of mine have differant styled spring paks fitted but they all measure 60mm wide.
you havent cut ya ruler off at the 10mm mark by any chance ?
Screwy_ScrewBall wrote:V8Patrol wrote:Screwy_ScrewBall wrote:woops sorry my baaad.....
dont know where in the hell i got 16mm wide from. thats smaller than a zooks leaves.
screwy
You had ya hand in ya pants again didnt ya !
spring width is 60mm
didnt have hands in pants..........
So where did ya get the 16mm from then ???
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Width
I wen and measured the LWB springs @ 60mm and the shorty @ 60 too after you left last night Screwy forgot to tell you hey...
Enforcer springs are CRAP!!!! More sagging than a 90 year old (that was in like 2 months of fittin em new too!!!
Mk
Enforcer springs are CRAP!!!! More sagging than a 90 year old (that was in like 2 months of fittin em new too!!!
Mk
MQ/MK Parts for sale!!!! See for sale section!
Well there ya go.
I have had a funny feeling they are 60 the hole time ( thats were i got 16 from, was thinking 60 ) then got confused and measured.
just looking at the ruler now.
the 0 doesnt start till 7mm in
I have had a funny feeling they are 60 the hole time ( thats were i got 16 from, was thinking 60 ) then got confused and measured.
just looking at the ruler now.
the 0 doesnt start till 7mm in
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
God of Magnificant Ideas!
Screwy_ScrewBall wrote:Well there ya go.
I have had a funny feeling they are 60 the hole time ( thats were i got 16 from, was thinking 60 ) then got confused and measured.
just looking at the ruler now.
the 0 doesnt start till 7mm in
& this ladies and gentlemen is the difference between professional and a rank amateur
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
V8Patrol wrote:Screwy_ScrewBall wrote:Well there ya go.
I have had a funny feeling they are 60 the hole time ( thats were i got 16 from, was thinking 60 ) then got confused and measured.
just looking at the ruler now.
the 0 doesnt start till 7mm in
& this ladies and gentlemen is the difference between professional and a rank amateur
But it does make you wonder how many things he possibly has stuffed up using this ruler to measure things.
r0ck_m0nkey wrote:V8Patrol wrote:Screwy_ScrewBall wrote:Well there ya go.
I have had a funny feeling they are 60 the hole time ( thats were i got 16 from, was thinking 60 ) then got confused and measured.
just looking at the ruler now.
the 0 doesnt start till 7mm in
& this ladies and gentlemen is the difference between professional and a rank amateur
But it does make you wonder how many things he possibly has stuffed up using this ruler to measure things.
HEY!!!
ive never used this ruler on my vehicles before
Its my old school ruler........
No wonder y i did so bad in maths
Amatuer...... PPFFFTT. Far from that, But still wouldnt quite go as far as professional
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Who is online
Users browsing this forum: No registered users and 4 guests