Outer Limits 4x4 Board

Hello there..
Is there any difference in the 70 series and the 73 series soft top, or are they interchangable.
Thanks
Ehsan

i top is narrower i have a bj73 with a custom soft top and it has budera (70's) split doors and with them on with the hard top they close alright but there are big gaps up the top. and the full doors wont fit the soft top

didnt know the 70 series come in a soft top. actual solft top or frp?


either way a 73 series is mwb and 70 series swb, so can't see that would be interchangeable. my guess anyway




bluey

I thought so too. FJ 73 is a MWB and FJ70 is a SWB. They make an FRP TOP for both. I have a FRP TOP ROOF for sale if wanted though...

Is there many other soft top FJ73s out there or am I the only one?

give me a couple of weeks and i will have mine on im in the middle of moving so once if settled in and will have room to take the frp off them i will be topless

Ahh you bugger rugger, thought I was one of the only ones, if not 'the' only one.

Well done though, it is good in the end, big roll cage on it and it looks good.

Want to chop my barwork down a little more though, as I had bostrim suspension seats and sat really high, I wanted to be able to clear the cage by about 6 inches or so, so i made the cage high.

Now with 33s, sagged/standard front leaves, and 60 series rear leaves, it sits at 2.1 metres high. Will be changing it, but just getting it back on the road for now, pics will be coming soon.

Meldge wrote:Ahh you bugger rugger, thought I was one of the only ones, if not 'the' only one.

Well done though, it is good in the end, big roll cage on it and it looks good.

Want to chop my barwork down a little more though, as I had bostrim suspension seats and sat really high, I wanted to be able to clear the cage by about 6 inches or so, so i made the cage high.

Now with 33s, sagged/standard front leaves, and 60 series rear leaves, it sits at 2.1 metres high. Will be changing it, but just getting it back on the road for now, pics will be coming soon.

this sounds good. does that mean you have removed the standard rollbar then?

pics would be great

Yeah I did remove the standard roll bar, but I had an aluminium replacement put in it's place that joins up with the rest of it...

Because I kept the rear seat I had to have another bar somewhere in that vacinity that then had some arms running down into the rear corners.

I want to be able to cut the bars down a little though, it does sit a little high (apparently you need head room for some reason).

I get it back this weekend, I have just bought 35" MTRs and a Suspension lift. It has a Body Lift already aswell so it's should be pretty big.

Might be able to get some photos on Sunday.