Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Gearbox crossmember for TH350 auto

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 43
Joined: Thu Apr 29, 2004 9:39 pm
Location: Slacks Creek (Brisbane)

Gearbox crossmember for TH350 auto

Post by Raymond Spackman »

Has anyone made a gearbox crossmember for a TH350 auto in a toyota landcruiser? It has the Marks adaptor between the box and transfer. I havent done one of these before and was wondering if anyone has and if they can tell me how to make one or if they have pics even better.
I have sent an email to Marks adaptors to see if they make one but haven`t heard back yet.
Any help would be greatly appreciated
Thanks
Raymond
Top
Posts: 687
Joined: Sun Apr 04, 2004 9:54 am
Location: Sydney

Post by up2nogood »

Anyone who does roll bars, or an exhaust shop with heavy wall tube, can bend you up a ripper one.

Just make the chassis and tranny mounts from 6mm steel plate before you get there to save some time and $.

Especially handy if the exhaust shop can do it, as you will be going there anyway.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 122 guests