Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Fuse between battery and fuse box?

For all things Electrical.

Moderator: -Scott-

Post Reply
Posts: 1119
Joined: Mon Dec 16, 2002 4:24 pm
Location: Neither here nor there

Fuse between battery and fuse box?

Post by TuffRR »

I'm currently putting together a fuse/distribution box and am unsure whether it is worthwhile putting an inline fuse between the fuse box itself and the battery.
The cable i am using between the fuse box and the battery is 4GA rated at 120amp and it is very unlikely i will be drawing this much through it ever. I will run things such as fridge, cb, uhf, gps lights etc out of the fuse box.

Also, i have run 15amp auto cable to the back of the car to run the engel. Is it reasonable to expect to be able to also have a cigarette lighter plug connected to this and run a camp light in the evening or would this place too much load on the wire? From what i have read the engel seems to draw about 6A max and the camplight about 1-2A.

TIA.
Range Rover - 4.4 V8, MD Crawler Box, F&R Lockers, 35" Centipedes, 4" lift. Overqualified WebWheeler!!!

Discovery - Bling touring stuff!
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

Most vehicles from the factory will have either a fusible wire or heavy duty fuse/ fuses hanging directly off the positive battery terminal. If the main cable should short out somehow (eg. rub through the insulation) it could help prevent a fire.
David
Posts: 1119
Joined: Mon Dec 16, 2002 4:24 pm
Location: Neither here nor there

Post by TuffRR »

Sorry, should have mentioned that this will be running of an auxillary deep cycle battery.
Range Rover - 4.4 V8, MD Crawler Box, F&R Lockers, 35" Centipedes, 4" lift. Overqualified WebWheeler!!!

Discovery - Bling touring stuff!
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

definately fuse it, with such a large cable. Unsure of the distance between the distribution box and the battery though, but even if it was to the other side of the engine bay I would still have a master fuse as close to the battery as possible.
Built, not bought.
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Area54 wrote:definately fuse it, with such a large cable. Unsure of the distance between the distribution box and the battery though, but even if it was to the other side of the engine bay I would still have a master fuse as close to the battery as possible.


I second that! If in doubt, put in a fuse. It's like insurance - it's better to have it and not need it, rather than need it and not have it.

Cheers,

Scott
Posts: 129
Joined: Tue Oct 28, 2003 5:03 pm
Location: Sydney

Post by Rough60 »

yep fuse it, or better yet jaycar have a 70 amp trip wich could be used.
i would go bigger on the rear wiring, maybe 20A, at night my fridge is normally unpluged ( except in this sydney weather at the moment ) and i run a fuse/distribution box at the rear with a 4GA main and a narva box to a camp light, rear int. light and fridge no prob.
Posts: 1119
Joined: Mon Dec 16, 2002 4:24 pm
Location: Neither here nor there

Post by TuffRR »

Ended up getting a 100 amp circuit breaker from Jaycar to go between the battery and the fuse box.
Range Rover - 4.4 V8, MD Crawler Box, F&R Lockers, 35" Centipedes, 4" lift. Overqualified WebWheeler!!!

Discovery - Bling touring stuff!
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest