Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
So what differences is there between the two besides the different lower ratios?
Is the series 3 stronger than series 1 or vice versa?
Are they both a simple bolt in install?
Im thinking series 1 may be better for the wifes zook (which we havnt bought yet ) because we will be doing a fair bit of sand driving and dont want super low, just a bit lower then stock.
Paul.
ausyota wrote:So what differences is there between the two besides the different lower ratios? Is the series 3 stronger than series 1 or vice versa? Are they both a simple bolt in install? Im thinking series 1 may be better for the wifes zook (which we havnt bought yet ) because we will be doing a fair bit of sand driving and dont want super low, just a bit lower then stock. Paul.
series 1's are a common breakage, but if you want 4:1 there is calmini and trail tuff and various other versions available.... or use a s3 and select a higher gear for sand..more choices then...not many s3's have broken, as they are made better these days.....christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Series 1 ratio will available again soon. (aprox feb) They will be a four gear set and all billet gears. Made to original factory tolerances. 4.11 to 1 ratio low range.
Series 3 are in stock. 6.129 to 1 ratio low range.
Liam wrote:Series 1 ratio will available again soon. (aprox feb) They will be a four gear set and all billet gears. Made to original factory tolerances. 4.11 to 1 ratio low range.
Series 3 are in stock. 6.129 to 1 ratio low range.
So Liam you are saying that the new series 1s will be as strong as the the 3s?
Paul.
Liam wrote:Series 1 ratio will available again soon. (aprox feb) They will be a four gear set and all billet gears. Made to original factory tolerances. 4.11 to 1 ratio low range.
Series 3 are in stock. 6.129 to 1 ratio low range.
Just in time for "Adventure Tour 05"
Will they still fit into a 1.olitre case?
Price approximately yet?
Christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
tripod has series 3 behind his 1.3 running 32 mongrels and he has no ratio dramas in the sand, he just uses high range.
I have s1 behind my 1.6 with 4.11 diffs and i do the same
Hey Paul, you could always buy my S3 for $4500, and get the rest of the car with it. It works great in the sand coz the tires have so much displacement.
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
DeWsE wrote:Hey Paul, you could always buy my S3 for $4500, and get the rest of the car with it.
That is an option What are the specs on your zook?
How many Ks?
Lockers?
Probably after something a bit more standard and neater (ie not rolled ). But we may consider it.
Paul.
DeWsE wrote:Hey Paul, you could always buy my S3 for $4500, and get the rest of the car with it.
That is an option What are the specs on your zook? How many Ks? Lockers? Probably after something a bit more standard and neater (ie not rolled ). But we may consider it. Paul.
Who cares about the spec's when it out wheel's the Hilux.....
Narr just jokes. I understand where your coming from with the neater bit.
RUF ome 35 lift
extended shackles
2" body lift
S3
Long range tank
175000 km with rebuilt head last year
new starter last year
custom 15x8 rims
33x12.5 mtr's
extended brake lines
92 model WT
open diffs
No carpet ATM, but have them in my shed
genie extractors
back seat, not in atm
over head console
CD...not that great though.
But yes it does have dent's and it does drive like a pig. I drove it to bunbury thursday night, and perth last night without any drama.
Is your mate still interested as well? I forgot to PM ya back sorry.
I'm in no rush to sell as I don't have any cash to buy another car....damn uni fee's
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
OldGold wrote:Buy my car and I'll buy DeWsE's! Rebuilt motor, new tyres, clutch, brakes etc...
What's the go with shorter diff ratios anyways? What are they likely to set you back, are they hard to find?
if you change your diff ratios your on road gearing will be crap unless you run bigger tyres to suit , unless you go from 3.9 to 4.11 (but why would you) but if you go to 5.12 r/p on 31's or smaller its a pain on the open road but good off road .
i paid $360 i think or 380 from overkill , if mainly offroad than they are worth evry cent imo
if its worth doing do it intensly , better still do it with MADPASSION
accept does a few thousang rpm at high way speed but not so bad
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
DeWsE wrote:Hey Paul, you could always buy my S3 for $4500, and get the rest of the car with it.
That is an option What are the specs on your zook? How many Ks? Lockers? Probably after something a bit more standard and neater (ie not rolled ). But we may consider it. Paul.
Who cares about the spec's when it out wheel's the Hilux.....
Narr just jokes. I understand where your coming from with the neater bit. RUF ome 35 lift extended shackles 2" body lift S3 Long range tank 175000 km with rebuilt head last year new starter last year custom 15x8 rims 33x12.5 mtr's extended brake lines 92 model WT open diffs No carpet ATM, but have them in my shed genie extractors back seat, not in atm over head console CD...not that great though.
But yes it does have dent's and it does drive like a pig. I drove it to bunbury thursday night, and perth last night without any drama.
Is your mate still interested as well? I forgot to PM ya back sorry.
I'm in no rush to sell as I don't have any cash to buy another car....damn uni fee's
Hmm its definatly an option.
Dewse would you have any idea if your mods would be engineerable?
The cops down here in Manji take great pleasure in their hobby that is stickering cars .
Maybe when we are in Perth for the weekend in a couple of weeks we could take a look at it.
Paul.
Hey Dewse sell me your transfercase and ill swap mine into yours .Paul Dewses mates dad still has a early modle 1 liter unlicenced but good motor only wants $850 for it i got it running was good
i think i payd 350 for my 1.3 case that included jack shaft and mouths and the rest of it
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
hey mick, cool az on the shackles...........i dont need a tcase, i just want the rockhopper gears.......prob would like to buy them already done in one but either or...........
rbzook: was that 350 just for the gears and where from????
clitmaster I think RB paid 350 for a standard t-case to put his rockhoppers in cause the coily case is Dudelux chain driven
I was just saying I had one cheap for such a purpose but now that I read your post I see you're asking about the rockhopper. Why RB said what he paid for a std case I don't know
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
90 on my speedo is about 105 actual speed and i do 4000rpms
also have 3.9R&P's and coulys gear box has different ratios as well
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)