Outer Limits 4x4 Board

What do you guys think of this leave setup. Heaps of rear flex!

Not bad at all.

looks like a 1/4 eliptic setup. I would like that but don't know exactly how to setup properly.

Thanks

i think youl find its 3/4 eliptic

Its one of the guys I wheeled with at Moab. He is connected with Spidertrax. A swing waya arm attached to the chassis with a rubber bush. It allows lots of flex but it isn't as progressive as a leaf is. It is a quicker and neater way of getting a 3/4 setup on a wide track as you can mount the arm outboard of the chassis.

Hmm that’s strange grimbo as that photo is from 2000-2001 moab, you were most probably their when it was taken! Yes that rig is fairly bolt on spider trax. The rear is a swing away ¾ rear and coil front.

Grimbo , How dose it feel when climbing in reverse ?


Larry.

only problem with a hinged pivoty thingy is you would loose alot of roll stiffnes in the rear end
So when one front wheel climbs, the whole car will follow and want to tip




mock