Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Its one of the guys I wheeled with at Moab. He is connected with Spidertrax. A swing waya arm attached to the chassis with a rubber bush. It allows lots of flex but it isn't as progressive as a leaf is. It is a quicker and neater way of getting a 3/4 setup on a wide track as you can mount the arm outboard of the chassis.
Hmm that’s strange grimbo as that photo is from 2000-2001 moab, you were most probably their when it was taken! Yes that rig is fairly bolt on spider trax. The rear is a swing away ¾ rear and coil front.
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
only problem with a hinged pivoty thingy is you would loose alot of roll stiffnes in the rear end So when one front wheel climbs, the whole car will follow and want to tip
mock
My photographic Art http://www.redbubble.com/people/ljxtreem
www.dirtcomp.com.au
Sierrajim wrote:
So hurry up, come back, buy a Lada (can't believe i just said that) and we'll go wheelin'.