Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

c4+4spd

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 181
Joined: Sun Aug 22, 2004 4:37 pm
Location: melbourne

Contact:
Contact swamp

c4+4spd

Post by swamp »

This is probably a stupid idea but I was just wondering if it has or could be done.
Iwas looking at an early auto conversion for rr's where they bolted a C4 ford auto in front of a 4spd box that had all the internals removed and the box was just a void as the size of the C4 was about the same as the bell housing. A shaft passed through from the output from the C4 to the transfer case.
Is it possible to run the C4 and also run the 4spd at the same time.
Don't run a clutch.
C4 in D 4spd in 4th it would operate as standard auto.
C4 in D 4spd in 3rd it would have approx 1.5 reduction.
So on and so forth.
If you get what I mean.
C4 in 1st 4spd in 1st transfer in low 120 ish to one.
Parts should be cheap and available, C4 can take some torque
Or am I just dreaming?
Regards
Michael.
out of my mind, back soon.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Interesting idea but the input and output shafts of each mean that it will be a long gerabox/ transfer combo as the empty case of the 4spd is required the output shaft of the auto to pass thru.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 35
Joined: Wed Jan 15, 2003 5:44 pm
Location: WA

Post by TUFRR »

yes it's been done!!!!
Top
Posts: 1285
Joined: Thu Jan 15, 2004 8:22 pm
Location: gold coast

Post by uninformed »

TUFRR wrote:yes it's been done!!!!

any details?????????

chjeers, serg
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

A long time ago I read in a mag about one of this conversion being done in a Rangie.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 181
Joined: Sun Aug 22, 2004 4:37 pm
Location: melbourne

Contact:
Contact swamp

c4+4spd

Post by swamp »

Ithink the c4 has a modified extra long output shaft. Modifing the shafts would be the hardest part . The 4spd input shaft would have to be shortened and fixed to the c4 output. Idon't know how it could be done but it doesn't seem impossible.
TUFFRR any info would be appreciated.
ta
out of my mind, back soon.
Top
Posts: 35
Joined: Wed Jan 15, 2003 5:44 pm
Location: WA

Post by TUFRR »

I have a book called "Range Rover A History" and there is an article on a 24 speed gear conversion using a Ford BW35 Auto and the Rangie
4 speed manual.

It has a pic from inside the Rangie showing a Tbar and a shortened 4 speed manual shifter and set well back is the hi/low lever.

There is no mention of exactly how they managed to get it all to work together.

A modified Fairie overdrive to underdrive would be far easier to build IMO!
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 3 guests