Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

fitting 33's on my lux.

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 153
Joined: Tue Apr 20, 2004 8:56 am
Location: Sydney

fitting 33's on my lux.

Post by Luv to 4B »

I have just done an engine conversion (3 litre turbo deisel 1KZ-TE) and i need to go to 33's to set the final drive ratio right again. Its a rigid front end lux. Im going to get ORI extended shackles all round and i have 2" springs already but....

Will this be enough lift to clear 33's if, i put IFS rears in the back and move the saggy rears into the front?

When this mod is done how many leaves and which ones do you take out of the rears that go in the front, if i have a heavy steel bull bar and getting a 9000 pound winch soon?

Any help or advice much appreciated.
My mind is like a steel trap....quite dangerous because i forget where i left it.
Top
User avatar
ToNkA
The Haggler!
Posts: 6651
Joined: Sun Oct 20, 2002 8:48 pm

Post by ToNkA »

I fitted 33's with only a 2 inch body lift and standard springs, with no rubbing. Maybe an option?
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Top
Posts: 85
Joined: Sat Oct 09, 2004 3:44 pm
Location: DARWIN N.T

Post by damo lux »

how much did it cost to get your 3.0 td and get it fitted?
Top
Posts: 391
Joined: Wed May 26, 2004 6:20 pm
Location: Seaham NSW

Post by My Lil Lux »

They should fit no worries, I run 2" body and 4" lift and fit 35's no worries, with room for 37's.
Try not to let your mind wander...It is too
small and fragile to be out by itself.
Top
Posts: 693
Joined: Sun Sep 26, 2004 2:37 pm
Location: Rochedale South - Brisbane

35's

Post by benhl »

hey My Little Lux - Have you moved the front diff fwd any? I have the same set up the at full articulation get slight rub with 33'2, i fear that 35's fit scrub the fark out of the back of my wheel arch.

any advice

want to run 35 baja radials
GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
Top
Posts: 3556
Joined: Mon Dec 13, 2004 7:58 am
Location: Western Sydney

Post by Busiboy »

what you got on the back?

Style side or tray?

Dumb question but you put the body lift on the back as well?
Something witty said by someone famous
Top
Posts: 388
Joined: Thu Oct 30, 2003 5:00 pm
Location: South Cast NSW

Contact:
Contact Macca177

Post by Macca177 »

i agree with everyone else

i cleared 33's with 4" lift. not a problem a bit of rubbage... went cross over steering ....moved diff forward and didnt touch at all then.
Cheers, Hayden!
________________
Top
Posts: 391
Joined: Wed May 26, 2004 6:20 pm
Location: Seaham NSW

Post by My Lil Lux »

Angle grinders are great :D

They let you fit any type of tyre ;)
Try not to let your mind wander...It is too
small and fragile to be out by itself.
Top
User avatar
ToNkA
The Haggler!
Posts: 6651
Joined: Sun Oct 20, 2002 8:48 pm

Post by ToNkA »

My Lil Lux wrote:Angle grinders are great :D

They let you fit any type of tyre ;)


I asked my angle grinder tonight If I could fit 38's. It said "nah mate can't do it".

You're full of shit.

:D ;)
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Top
Posts: 391
Joined: Wed May 26, 2004 6:20 pm
Location: Seaham NSW

Post by My Lil Lux »

You talked to your angle grinder, get a life web-wheeler :finger:
Try not to let your mind wander...It is too
small and fragile to be out by itself.
Top
Posts: 388
Joined: Thu Oct 30, 2003 5:00 pm
Location: South Cast NSW

Contact:
Contact Macca177

Post by Macca177 »

haha the angle grinder made more room for me...maybe u aint talkin tough enough TONKA!!!

but yes the grinder will make lotsa room for ya if u want but its not needed for 33's if u do it properly... just experminet with differnt setups till ur happy.


or a BFHammer will do the job!
Cheers, Hayden!
________________
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 3 guests