Wat are peoples opinions ...........im gettin ready to lift the mav and im just after peoples opinions on wat they use Brands? .......wat they think of it ........and wat would suit i aready know a couple of people runnin dobinsons springs are these the poo ........had any saggin dramas .....
Im lookin at 6" lift and rear links will be changed eventually tooo
Cheers Dan
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Peoples opinions please (its lift time)
Peoples opinions please (its lift time)
[b][i] DAN [/i] [/b]
:silly:
:silly:
Just do everything at once or you will give yourself more trouble than it is worth and spend more $ than you really need to.
Dobinsons are OK, I think kings are much better, but I don't know if they will wind a coil that tall??
You have already cut the quarter panels off, hey? If you have, move the rear axle back 50-60mm when you do the 4-link and all your tailshaft problems will vanish. You will have to cut the coil mounts off the rear housing and roll them forward and burn them back on. Shock mounts have to go up & back a bit.. Front end is easy, either castor plates or 5-link it, you know which option is best
Move the front axle forward as well, about 30mm seems to be about all you can get before things start hitting.
Dobinsons are OK, I think kings are much better, but I don't know if they will wind a coil that tall??
You have already cut the quarter panels off, hey? If you have, move the rear axle back 50-60mm when you do the 4-link and all your tailshaft problems will vanish. You will have to cut the coil mounts off the rear housing and roll them forward and burn them back on. Shock mounts have to go up & back a bit.. Front end is easy, either castor plates or 5-link it, you know which option is best
Move the front axle forward as well, about 30mm seems to be about all you can get before things start hitting.Kings do wind 7" springs custom for Wizard on the gold coast. As used by Big Red, can get a full kit with either Rancho or Koni (revalved truck shocks).
Dobinson are good but do sag sooner or later. A mates tourer Maverick on 3" springs lasted 2 years before he replaced the rear coils. Fronts still OK, just weight seemed to kill them.
Ian
Dobinson are good but do sag sooner or later. A mates tourer Maverick on 3" springs lasted 2 years before he replaced the rear coils. Fronts still OK, just weight seemed to kill them.
Ian
-----
Ian
GU 4500 Petrol, 35s, Gearmaster, front lawns and fire trails only....
Ian
GU 4500 Petrol, 35s, Gearmaster, front lawns and fire trails only....
Thanks guys
Carlton as it turns out our trucks may end up similiar but 5 link front will have to wait awhile .....Money (bubs on the way) But i will change the rear early and i will move axle back accordingly might just move the front forward 15mm for starters shocks will definately be ranchos 9000's ....
really want to get it lifted so i can go wheelin and get used to it as is so i can really notice the difference of all the link moddin (and besides i havent even had this on the trail so there will be alot of time to get used to drivin a much bigga heavier rig...
Jk your info will be great to matey cant wait to see your truck wen its dunn
Ian cheers 4 the info will have to decide wat way i go
really want to get it lifted so i can go wheelin and get used to it as is so i can really notice the difference of all the link moddin (and besides i havent even had this on the trail so there will be alot of time to get used to drivin a much bigga heavier rig...
Jk your info will be great to matey cant wait to see your truck wen its dunn
Ian cheers 4 the info will have to decide wat way i go
[b][i] DAN [/i] [/b]
:silly:
:silly:
Who is online
Users browsing this forum: No registered users and 0 guests