HI,
Are Pajero PTO winches any good? having had a bit of experience with Nissan's one and they can work very well, Just wondering if anyone knows if the Pajero ones are any good? And I don't know what its off (other than a Pajero) but will they fit a gen 2 NJ?
Cheers, Glen
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
PTO winch
Moderator: -Scott-
They should bolt up ok but won't work in the V6 as the t/case gearing is different than the 4 cylinder (which they were available for).
3.0 V6 t/case gearing is 1.925:1, 4 cylinder is 1.944:1.
You would need to get a PTO drive gear made up to match/mesh with the 1.925 V6 t/case idler gear.
I did read somewhere that they are only rated at 6000lb maximum line pull but can't remember exactly but do recall how surprised I was at the low rating.
3.0 V6 t/case gearing is 1.925:1, 4 cylinder is 1.944:1.
You would need to get a PTO drive gear made up to match/mesh with the 1.925 V6 t/case idler gear.
I did read somewhere that they are only rated at 6000lb maximum line pull but can't remember exactly but do recall how surprised I was at the low rating.
I just luv my "clacker Jabber"
Thanks for the response. if anyone is interested here is the auction for one.
http://www.trademe.co.nz/Trade-Me-Motor ... 183388.htm
cheers, Glen
http://www.trademe.co.nz/Trade-Me-Motor ... 183388.htm
cheers, Glen
Who is online
Users browsing this forum: No registered users and 1 guest