Outer Limits 4x4 Board

HI,

Are Pajero PTO winches any good? having had a bit of experience with Nissan's one and they can work very well, Just wondering if anyone knows if the Pajero ones are any good? And I don't know what its off (other than a Pajero) but will they fit a gen 2 NJ?

Cheers, Glen

They should bolt up ok but won't work in the V6 as the t/case gearing is different than the 4 cylinder (which they were available for).
3.0 V6 t/case gearing is 1.925:1, 4 cylinder is 1.944:1.
You would need to get a PTO drive gear made up to match/mesh with the 1.925 V6 t/case idler gear.
I did read somewhere that they are only rated at 6000lb maximum line pull but can't remember exactly but do recall how surprised I was at the low rating.

Thanks for the response. if anyone is interested here is the auction for one.

http://www.trademe.co.nz/Trade-Me-Motor ... 183388.htm

cheers, Glen