Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Moving LPG filler hose

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 257
Joined: Thu Nov 27, 2003 10:22 pm
Location: Stanthorpe- QLD

Moving LPG filler hose

Post by Snarba »

Hi all..... just moving my LPG tank and filler hose to make room for some cutting. My question is can I undo the bulky filler head from the hose or is that where the valve is? or is it on the tank end of the hose? Any help much appreciated. thanx
I've got a WEAPON OF MOSS DETRUCTION
Top
Posts: 1516
Joined: Wed Mar 10, 2004 3:36 pm
Location: melbourne australia

Contact:
Contact pcman

Post by pcman »

there is a valve at both ends if you udo the filler line a small amount of gas may be released tho alot of the valves at the fillers leak slowly so some wont

undo it and you will be fine
Top
Posts: 260
Joined: Wed May 05, 2004 5:29 pm
Location: northern suburbs vic

Post by holeyhardtop »

be aware. i have had to flare off gas tanks when the valve in the tank was faulty and gas was leaking out the filler valve which was also faulty. just crack it slowly in a well ventilated area wtih no source's of ignition near by. remember it is heavier than air and will pool in low areas.
take care.
Top
Posts: 257
Joined: Thu Nov 27, 2003 10:22 pm
Location: Stanthorpe- QLD

Post by Snarba »

thanks a lot guys
I've got a WEAPON OF MOSS DETRUCTION
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest