Outer Limits 4x4 Board

Have a friend with a 5 inch coil lift on his GU Patrol, the ball joint angle on the drag link is too severe, is there a way or something which can be done to correct the problem?

have one made from 30mm solid bar, with the external threads to suit the cas-chassis tie-rod ends, they have a bit more movement in them, then if you need more you can put a *slight* bend in the link right next to the thread to flatten the ends out.

Sorry Drafty, while you were here I should have shown you my hi steer kit that lifts the arm over 3" at the swivel end.
It wasnt bolted on at the time, but you would have gotten the idea.

Bring everything that is not bolted on next weekend, I'll find something to bolt it to!