Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4 link in a coilier

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

4 link in a coilier

Post by RB zook »

sick of always bending control arms went to overkill and got sam to sort out a 4 link for my junk :D

onrd handling is awesum and another think it squats under acceleration instead of lifting passengers side


while we were at it we moved the diff back 1 inch and i got keen with the air hacksaw.pics to come verry soon

just need to move shock mounts to get it flexin thou i am gunna do that after the front if 4 linked

verry happy so far :D :D
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 614
Joined: Sat Jul 31, 2004 2:42 pm

Post by roc box »

sounds sweet when ya comin down to try it :?:
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

have to come soon mate also got a rear bar thou i needs some modds :D
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

This setup will be available as a kit and we are currently making a kit to replace the fornt arms as well
SAM

now for the pics :D
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

pics will be up tomorrow arvo :D
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

Are you going triangulated 4 link in the front if not what are you going to fit?
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

duncan wrote:Are you going triangulated 4 link in the front if not what are you going to fit?


it wont be a trianglated 4 link (daily driven rig) it will just be the same as the rear 3 straight links with panhard

i belive ruff runs this setup on the front of his green buggy and likes it (ruff only has power steer so still has a draglink)
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

OVERKILL ENGINEERING wrote:This setup will be available as a kit and we are currently making a kit to replace the fornt arms as well
SAM

now for the pics :D


At what sort of cost :?:

HRZOOK (potential customer)

can't have rb zook out driving my rig, although he does already :oops:
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

HRZOOK wrote:
OVERKILL ENGINEERING wrote:This setup will be available as a kit and we are currently making a kit to replace the fornt arms as well
SAM

now for the pics :D


At what sort of cost :?:

HRZOOK (potential customer)

can't have rb zook out driving my rig, although he does already :oops:


$1250
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

OVERKILL ENGINEERING wrote:
HRZOOK wrote:
OVERKILL ENGINEERING wrote:This setup will be available as a kit and we are currently making a kit to replace the fornt arms as well
SAM

now for the pics :D


At what sort of cost :?:

HRZOOK (potential customer)

can't have rb zook out driving my rig, although he does already :oops:


$1250
SAM


Ok is that fitted?

Can this kit be purchased as a DIY project and if so cost?

Cheers
HRZOOK
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Supply only can be done your self
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

Ok so whats in the "KIT"

PICS god dam it :D

HRZOOK
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

HRZOOK wrote:Ok so whats in the "KIT"

PICS god dam it :D

HRZOOK


i have his digi so he cant get pics yet :lol:
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

gotta see, gotta see :D
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

here can sort of see it

and yess i kept drivin from there :D and got on the loud pedal on that ledge the rear hust squated and drove it was luvin it
Image

will get pics tomorrow in daylight
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

duncan wrote:Are you going triangulated 4 link in the front if not what are you going to fit?


The front will be very similar to our coil kit which is a three link as Tim stated
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

i got the shits when this hapened all the time
You do not have the required permissions to view the files attached to this post.
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

:D
You do not have the required permissions to view the files attached to this post.
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

flexed nice this arvo at menai :D
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

few flex shots :D
You do not have the required permissions to view the files attached to this post.
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 614
Joined: Sat Jul 31, 2004 2:42 pm

Post by roc box »

nice flex looks like it works well.
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

roc box wrote:nice flex looks like it works well.


thanks.

just need to save my coin and get the front workin like that.

also need coil retainers :oops:
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 2001
Joined: Wed May 26, 2004 9:47 pm
Location: sydney

Contact:
Contact runnin4life

Post by runnin4life »

looks sweet nice rear bar too
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

yeah rear bar has to be lifted thou fukin body lift :cry:
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 6693
Joined: Mon Feb 09, 2004 10:13 pm
Location: Newcastle

Post by high n mighty »

Grimace Ryan, very very Grimace :D :finger:

but lookin good ;)
[quote="fool_injected"]
I pity my brother when she is a teenager[/quote]
Top
Posts: 2134
Joined: Tue May 11, 2004 6:03 pm
Location: Armidale

Post by BOGAN V8 »

poser shots.... :lol: :lol: :lol:
94 HJZ 80 GXL 4 Inch lift 35s. TJM Accessories Front to back
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

Forgive me if I am wrong but This four link looks pretty much the same as my dads jackaroo setup....is it?

HRZOOK
Top
Posts: 396
Joined: Fri Dec 24, 2004 4:05 pm
Location: in the shed cutting/grinding/welding mocks old shit vic

Post by mugginsmoo »

will this kit fit a jimny?,
i know that OME 2" coily suspention kits fit a jimny.
Top
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Post by muppet_man67 »

mooman wrote:will this kit fit a jimny?,
i know that OME 2" coily suspention kits fit a jimny.
since when has ome had a coily lift? And it wouldnt fit because coily front end is a spring over shock setup whilst jimnys the springs and shocks are seperate.
Top
Posts: 396
Joined: Fri Dec 24, 2004 4:05 pm
Location: in the shed cutting/grinding/welding mocks old shit vic

Post by mugginsmoo »

don't underestimate the interchangability of suzuki parts.
just because one is coil-over doesn't mean that the springs wont fit, i agree that the shock's would be differant, but i'm sure the springs are the same.
the only reason i'm saying this is because i have a magazine artical from NZ where a chap used an OME lift (could have been just the springs) on a Jimny that was for a coily, the mag was also supprised that the kit was an OME.

just curious.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 70 guests