Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

100 Series IFS Lift Info

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 469
Joined: Fri Sep 10, 2004 1:45 pm
Location: Melb

100 Series IFS Lift Info

Post by sootygu »

I am trying to find out what is the max lift possible without any complecations on the front of the IFS L/C. Have spoken to a few and they quote from 0-30mm and some say you need new torsoin bars and some say not. Not after a huge lift only one that will not compromise the handling and strenght.

Any info would be of help.
Top
Posts: 249
Joined: Mon May 26, 2003 9:37 pm
Location: brisbane

Post by greenhilux »

DO you have a bullbar and or winch? if so you will new new, stronger t/bars, if not stock ones will suffice. About 30mm is all you will get out of them.
Top
Posts: 469
Joined: Fri Sep 10, 2004 1:45 pm
Location: Melb

Post by sootygu »

It only has a ally bull bar and no winch.
Top
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

Have seen and heard of the 100 series with ifs that have colapsed its in one of the 4wd monthlys not sure what month maybe december or earlier than that
Top
Posts: 349
Joined: Tue Nov 12, 2002 5:40 pm
Location: Central Coast NSW

Post by hophoar »

have a look at the balljoint spacers there using in 4runner lifts, might be the same size.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest